<![CDATA[Sheng Wei Precision Co., Ltd.]]> http://www.shengwei.com.tw Tue, 28 Apr 2015 17:00:08 +0800 3600 News update(2015/Oct/14 22:05:47) http://www.shengwei.com.tw/supplier_news.html News update (2015/Oct/14 22:05:47) news Wed, 14 Oct 2015 22:05:47 +0800 Faq update(2010/Jan/25 11:03:12) http://www.shengwei.com.tw/supplier_faq.html Faq update(2010/Jan/25 11:03:12) faq Mon, 25 Jan 2010 11:03:12 +0800 <![CDATA[CNC Turning Machining CNC Turning Machining Forming Step Introduction (CNC Turning Machining)(2015/Jul/10 13:42:30)]]> http://www.shengwei.com.tw/E6-CNC-Turning-Machining.html
  • This work piece completes by a CNC Turning Machining processing.
  • As the left, from left to right to show, in the processing flow, change the shape of the work piece
    • First drill the center hole, and the outer diameter rough turning.
    • Center bore fine boring processing, Outer diameter precision work.
    • The outer diameter inserts the ditch thick precision work.
    • Second main axle clamp, back trench processing.    

    Above explanation, hoped can let fellow customers even more understand the lathe the processing procedure.

    (2015/Jul/10 13:42:30)]]>
    Fri, 10 Jul 2015 13:42:30 +0800
    <![CDATA[CNC Turning Machining Special precise components (CNC Turning Machining)(2015/Apr/11 15:19:37)]]> http://www.shengwei.com.tw/E5-CNC-Turning-Machining.html
  • This work piece completes with the CNC lathe processing.
  • Because the material is SUS316L, moreover the work piece center bore for ∮1.5, needs to drill a hole 18.0 depth, 12 times drill the depth of hole approximately, the processing difficulty are higher than the common work piece, needs the quite high technology to be able to make it.
  • Outer diameter with inside diameter wall thickness, unilateral only then approximately 0.25mm, manages the cutting tool and the cutting tool processing method avoids the key which the work piece distorts.
  • (2015/Apr/11 15:19:37)]]>
    Sat, 11 Apr 2015 15:19:37 +0800
    <![CDATA[CNC Turning Machining Optical elements (CNC Turning Machining)(2015/Jul/10 13:45:53)]]> http://www.shengwei.com.tw/E7-CNC-Turning-Machining.html
  • This components match the CNC Turning Machining  with CNC milling machine to complete.
  • The surface roughness of this part, the following requirements Ra0.4.
  • Because the surface functional requirements, so the contour measuring instruments and alignment, and 2D drawing, the outline must be within 0.02 degrees.
  • (2015/Jul/10 13:45:53)]]>
    Fri, 10 Jul 2015 13:45:53 +0800
    <![CDATA[CNC Turning Machining Electronic cigarette (1) (CNC Turning Machining)(2015/Apr/11 15:06:06)]]> http://www.shengwei.com.tw/E1-CNC-Turning-Machining.html
  • This spare part is first individual by the CNC lathe processing, then carries on the assembly.
  • Because two work pieces must press in the assembly mutually, therefore the aperture and the outer diameter size must control in 0.008mm.
  • Because the copper system work piece must carry on step of the electrogilding, can have the certain membrane thick production, therefore in the front end lathe processing, the common difference must control specially, after avoids the galvanization because of surpassing the common difference, but is unable the pressure to match.
  • (2015/Apr/11 15:06:06)]]>
    Sat, 11 Apr 2015 15:06:06 +0800
    <![CDATA[CNC Turning Machining Titanium alloy screw processing (CNC Turning Machining)(2015/Apr/11 15:16:19)]]> http://www.shengwei.com.tw/E4-CNCTurning-Machining.html
  • This work piece completes by the CNC lathe processing.
  • This work piece designs originally for the steel system components, because but requests to reduce the weight, therefore chooses the titanium alloy to manufacture, although the material expense is more expensive than the common steel products, but the titanium alloy union functionality and the intensity, are its work piece bring a greater value.
  • Titanium alloy special characteristic: Intensity high, corrosion resistance fine, thermal-expansion coefficient small, fatigue strength high, nonmagnetic and so on, may apply in various industries.
  • (2015/Apr/11 15:16:19)]]>
    Sat, 11 Apr 2015 15:16:19 +0800
    <![CDATA[CNC Turning Machining OEM :CNC lathe machining ()(2015/Mar/8 22:29:17)]]> http://www.shengwei.com.tw/product001.html Sheng Wei has precise CNC lathe multi-machining technique, the precision Sheng Wei can achieve is :
    1. deep-hole machining : for stainless steel for example, the max. depth the machining can reach is ten time the diameter of the drill.
    2. Small hole machining : the smallest hole machining we can achieve is as small as 0.1mm
    3.Outer thread machining : The precision we can achieve is M1 x 0.2
    4. Inner thread machining : The precision we can achieve is M0.6 x 0.15
    5. Surface roughness : We can achieve Ra0.2 Rmax0.8s Rz0.8z
    6. Machining tolerance : The precision we can achieve is 5μ for OD, 5μ for length and 5μ for ID.   
    7. Precision thread machining : The precision we can achieve is class 1 thread (JIS, UNS) such as M2Example shown on photo : It is very important to keep the inner hole completely smooth and surface imperfection is not allowed.x0.4P,M3x0.5P,M4x0.7P.. etc.
    As this is concerned, parts are put in a blister tray after 100% visual check for the purpose of improving the operation efficiency, extend the machine life and reducing lose of the production for our clients.
    In addition, all parts are manufactured under Sheng Wei’s strict quality control, and inspected by our state-of-the-art inspection machines. As a result, our parts can meet CPK and CP requirement and achieve 99.999% yield rate when ship out.(2015/Mar/8 22:29:17)]]>
    Sun, 8 Mar 2015 22:29:17 +0800
    <![CDATA[CNC Turning Machining CNC Machining Service (01 - Medical Accessories)(2013/Dec/18 16:48:01)]]> http://www.shengwei.com.tw/cnc_lathe_machining.html Sheng Wei is dedicated to the manufacture of CNC lathe machining parts as well as other CNC machining service like tuning knobs, turning parts, milling parts, and machine shafts.  In addition, Sheng Wei's further more experiences of blow mold making, slicing & milling, and cutting & forming also directly lead Sheng Wei up to the higher stage of technical field; not only sustaining its product/launch quantity of CNC Lathe Machining with stability, but also upgrading its technicians' skills.

    Emphasizing presenting the anti-rust and long-term use parts on precision CNC parts, the CNC machining service offered by Sheng Wei comes in multiple categories. Sheng Wei continues to advance its research on machined parts with higher standard materials such as imported high-level carbon, stainless steel, and copper.  The CNC lathe machining parts are widely used in fields like medical equipment or metal machines.
     

    Sheng Wei fully utilizes it's capabilities and state-of-the-art machining, milling & turning equipment to create a high precision CNC machining service and products, like turned parts, turning parts, machined parts, machine shaft & metal parts etc for medical equipment, accessories & supplies. Sheng Wei accepts either OEM or ODM orders. Please feel free to contact us for further details on our product.

     

    (2013/Dec/18 16:48:01)]]>
    Wed, 18 Dec 2013 16:48:01 +0800
    <![CDATA[CNC Turning Machining CNC Turning Machining ( Engine Segment)(2015/Jan/15 18:23:55)]]> http://www.shengwei.com.tw/cnc_turning_machining.html  

    Sheng Wei Precision Co., Ltd., as one of the leading CNC turning machining manufacturers in the industry, offers a wide selection of parts ranging from agricultural equipment parts, automotive parts, and power tool parts, etc.

    The customers are welcome to order highly-customized CNC turning machining parts because most of the auto parts require high precision technology and would work better by their own designed durability and versatility. With advanced technology and great innovation, Sheng Wei is experienced enough to offer customized services according to requirements of customers.

    Sheng Wei enforces rigorous inspections on quality and safety. All the parts produced by Sheng Wei are made of steel and carbon of superior quality. Sheng Wei has complete service system for all the customers. The before-sale service offers potential customers substantial information of the products, and the after-sale service provides the well-rounded services that satisfy individual customer's demand on the customized parts.

    (2015/Jan/15 18:23:55)]]>
    Thu, 15 Jan 2015 18:23:55 +0800
    <![CDATA[CNC Turning Machining Milling Part (16)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/16-milling_part.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Electronic cigarette (2) (CNC Turning Machining)(2015/Apr/11 15:09:31)]]> http://www.shengwei.com.tw/E2-CNC-Turning-Machining.html
  • This work piece is the CNC lathe processing completes.
  • This work piece for outward appearance, therefore in lathe worker time needs the special cutting tool, can achieve the customer request the gloss and the roughness of surface.
  • (2015/Apr/11 15:09:31)]]>
    Sat, 11 Apr 2015 15:09:31 +0800
    <![CDATA[CNC Turning Machining Electronic cigarette (3) (CNC Turning Machining)(2015/Apr/11 15:12:46)]]> http://www.shengwei.com.tw/E3-CNC-Turning-Machining.html This work piece is the CNC lathe processing completes. This work piece for outward appearance, therefore in lathe time needs the special cutting tool, to achieve the customer request the gloss and the roughness of surface.

    (2015/Apr/11 15:12:46)]]>
    Sat, 11 Apr 2015 15:12:46 +0800
    <![CDATA[CNC Turning Machining Engine Segment (06)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/06-engine_segment.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining CNC turning machining ()(2015/Mar/8 22:30:01)]]> http://www.shengwei.com.tw/cnc-turing-machining.html Sheng Wei Precision Co., Ltd., as one of the leading CNC turning machining manufacturers in the industry, offers a wide selection of parts ranging from agricultural equipment parts, automotive parts, and power tool parts, etc.  Sheng Wei is with the most meticulous care for every single operation, because all people in Sheng Wei are well trained and aware that even a small neglect may cause a considerable loss of time and money of both sides.  Each of the CNC turning machining shown on the photo focuson holding the roundness and thread precision when production.  

    The machining provided by Sheng Wei is precisely made because most of the parts are difficult to cut, and the roundness requests 0.05 mm only, so with the special threads such as 9/16-32 UN-2A,10-32 UNF-2A,0.145-80 UNS-3A,5/16-24 UNF-2A,2-56 UNC-2A will be a serious task for us.  The customers are welcome to order highly-customized CNC turning machining parts because most of the auto parts require high precision technology and would work better by their own designed durability and versatility. With advanced technology and great innovation, Sheng Wei is experienced enough to offer customized services according to requirements of customers.

    Sheng Wei enforces rigorous inspections on quality and safety. All the parts are made of steel and carbon of superior quality. Sheng Wei has complete service system for all the customers. The before-sale service offers potential customers substantial information of the products, and the after-sale service provides the well-rounded services that satisfy individual customer's demand on the customized parts.

    (2015/Mar/8 22:30:01)]]>
    Sun, 8 Mar 2015 22:30:01 +0800
    <![CDATA[CNC Turning Machining Precision Machining ()(2012/Mar/12 16:35:54)]]> http://www.shengwei.com.tw/precision-machining.html Sheng Wei features in supplying and manufacturing various precision machining parts including tuning knobs, turning parts, milling part, CNC parts, machine shaft & metal parts, Electrol Discharge Machining, and more. All of the items are manufactured with great quality, which has brought good reputation to the manufacturer by worldwide customers.  The precision machining is focusing on holding the symmetry and center between holes so as to improve the operation efficiency, exten the machine life and reducing lose of the production when clients insert the part into their machine. 

    In addition, all precision metal parts are manufactured under Sheng Wei’s strict quality control, and inspected by our state-of-the-art inspection machines to achieve a 99.999% yield rate.  Sheng Wei's metal precision machining experiences and professional knowledge of blow mold making, slicing & milling, and cutting & forming directly lead Sheng Wei up to the higher stage of technical field, that's why Sheng Wei's technique stands tightly in today's market, receiving high reputation from most overseas and domestic customers.

    At Sheng Wei's factory in Taipei County, customers and buyers have the opportunities to view more machining metal tools/parts and pneumatic devices are also included.  From which, we are confident to add more value for our clients for any project awarded to Sheng Wei. And we will focus on further more innovation to touch down buyers' demands.  

    (2012/Mar/12 16:35:54)]]>
    Mon, 12 Mar 2012 16:35:54 +0800
    <![CDATA[CNC Turning Machining Agricultural Machinery (15)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/15-agricultural.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Power Hand Tools (11)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/11-power_hand.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Metal Machining ()(2011/Oct/21 11:35:29)]]> http://www.shengwei.com.tw/metal-machining.html The metal machining, one of the featured products from Sheng Wei Precision Co., Ltd. a Taiwan based manufacturer, specializing in offering a variety of products and services, can work on all kinds of exotic materials because of the standard production line and strict quality control.  Examples are shown on the photo left side.   Our machining services mainly focus on medical parts, and they are usually made of difficult-to-cut material such as SUS 630, titanium alloy and peek.  Since we've won the reputation in the industry, we provide OEM/ODM services for the metal machining to the market worldwide to meet your demands.  

    The more detail featuring materials for you to choose from are as follow: 

    1. The Machining | Engineering plastic series : POM, PEEK, DERLIN, PETP, PVC, PTF, etc
    2. Stainless steel: SUS303, SUS303Cu, SUS303Fe, SUS304, SUS304L, SUS316, SUSS316F, SUS316L, SUS416, SUS430, SUS630, 17-4PH etc.
    3. Alum. alloy series : A6061, A6061T6, A5056, A7075, A2021, etc
    4. Brass series : C3604, C3602, C5341 etc.
    5. Titanium alloy series : 64 titanium, pure titanium, medical titanium, etc.
    6. All kinds of exotic materials

    As a well-experienced manufacturer of metal machining, we have been devoted ourselves into the best product to satisfy our customers.  We not only provide quality products but also services go along with the products.  With complete service system, you can send the drawing or contact us to discuss your requirement; Sheng Wei is experienced enough to offer customized services and execute blueprints according to your requirements.


    (2011/Oct/21 11:35:29)]]>
    Fri, 21 Oct 2011 11:35:29 +0800
    <![CDATA[CNC Turning Machining Electronic & Energy Parts (20)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/20-electronic.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Engine Segment (07)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/07-engine_segment.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Precision Machining (19 - Knobs)(2011/Aug/18 11:27:54)]]> http://www.shengwei.com.tw/precision_machining.html Sheng Wei features in supplying and manufacturing various precision machining parts including tuning knobs, turning parts, milling part, CNC parts, machine shaft & metal parts, Electrol Discharge Machining, and more. All of the items are manufactured with great quality, which has brought good reputation to the manufacturer by worldwide customers.

    Sheng Wei's metal precision machining experiences and professional knowledge of blow mold making, slicing & milling, and cutting & forming directly lead Sheng Wei up to the higher stage of technical field, that's why Sheng Wei's technique stands tightly in today's market, receiving high reputation from most overseas and domestic customers.

    At Sheng Wei's factory in Taipei County, customers and buyers have the opportunities to view more machining metal tools/parts and pneumatic devices are also included. And Sheng Wei will focus on further more innovation to touch down buyers' demands.

    (2011/Aug/18 11:27:54)]]>
    Thu, 18 Aug 2011 11:27:54 +0800
    <![CDATA[CNC Turning Machining Precision Turning Taiwan ()(2015/Apr/28 16:57:07)]]> http://www.shengwei.com.tw/machining-service.html Sheng Wei is a reliable Taiwan based CNC machining manufacturer of precision turning parts and precision CNC machined parts and owns reputation in providing quality items and techniques with the most meticulous care for every single operation. As the leading manufacturer who provides precision turning parts and CNC milling service in the industry, we adopt the premium technology to fabricate each machining part used in automotive, telecommunication, power tool & construction, agricultural and energy related industry, etc.

    Most manufacturers could only start to do the work after receiving the blueprints. With CNC precision turning and machining technique and great innovative ideas, Sheng Wei is considered as experienced enough to offer CNC milling service and execute blueprints according to the customers’ demand for their product line. We help you to achieve a better and more efficient way to manufacture your products.

    With rigorous inspections on quality and safety, complete system, advanced technology and experienced technician, Sheng Wei Precision Co., Ltd. can provide the best for your requirements. Want to know more about us and our quality products and CNC precision turning service? Please send your inquiry for further information.

    (2015/Apr/28 16:57:07)]]>
    Tue, 28 Apr 2015 16:57:07 +0800
    <![CDATA[CNC Turning Machining Implant Appliances (02)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/02-implant_appliances.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining IC & Components (03)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/03-ic_components.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Turning Knobs (18)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/18-tuning_knobs.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining cnc machining Taiwan (09)(2015/Apr/28 16:58:37)]]> http://www.shengwei.com.tw/cnc-machining-Taiwan.html Sheng Wei has a wide selection of CNC products including CNC machining centers, CNC lathe machining and CNC milling equipment for production of CNC machining parts. We take lead in Taiwan based on our high quality material—stainless steel and sophisticated device which develops high efficiency and accuracy products in the CNC industry. All the CNC machining products are ensured to meet our valued customers around the world.

    With rich experience of more than 30 years in Taiwan, Sheng Wei is famous for their cutting edge technology and constant research on superior CNC machining parts and CNC milling machines. We have devoted on keeping improving our profession and technique to reach a world leading manufacturer in the market and have extended our CNC technology to medical, technological and other specific field like face, curved surface, slot, gear, and cam milling, etc.

    Sheng Wei strives to offer rigorous inspections on quality and safety, complete service system on every detail of the CNC machining. Hence, we have higher accuracy compared to other companies in the competitive market. If you’re looking for a reliable CNC manufacturer, we are your best choice. Don’t hesitate to contact us for more detailed information, your requests are welcome.

    (2015/Apr/28 16:58:37)]]>
    Tue, 28 Apr 2015 16:58:37 +0800
    <![CDATA[CNC Turning Machining Telecommunications & Communications (08)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/08-telecommunications.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC Turning Machining Machining Parts (14)(2013/Mar/5 12:20:14)]]> http://www.shengwei.com.tw/machining_parts.html Machining Parts

    Sheng Wei, specialized in manufacturing many machining parts, also presents its premium CNC machinery technology in making turning parts, milling parts, precision machining parts, machined parts and any other metal parts etc. With its great capitalization and advanced total automatic system, Sheng Wei's machining parts deeply wins customers' hearts in this field.


    In order to widen its marketing channels with both overseas and domestic partners, Sheng Wei invests a great amount of human & material resources to expand its factory scale and production model. Sheng Wei, better than other machining parts suppliers, has its own business model focused on not only offering before-sale information in bargaining but providing after-sale services to satisfy all its returning, frequent and potential customers.


    For multi-production, Sheng Wei dedicated itself on innovating more types of machining parts, including the automotive parts, telecommunication parts, agricultural parts, power tool parts, energy related parts, and shaft & OA parts. With its well-equipped factory and well-trained R&D staff, Sheng Wei tries hard to open the blue ocean, insisting on presenting the best-quality machining parts with multiple categories. For instance, Sheng Wei is capable of dealing with special orders, even with customized blueprint for designing the newest machining parts. The experienced blow mold making, slicing & milling, and cutting & forming techniques directly lead Sheng Wei toward its professional and technical stage, sustaining its product/launch quantity with stability.


    At Sheng Wei's factory in Taipei County, buyers have the chances to view more machining parts, metal tools/parts, and pneumatic devices beyond the imagination; both the price and the quality can win clients’ confidences. The severe safety and quality control of Sheng Wei's machining parts indeed brings buyers faith and trust. Insisting on using top quality steel and carbon, Sheng Wei absolutely stresses on importing pure and high level materials, sources, and accessories for making its products, willingly launching these machining parts into the market with fair price.


    Many Machinery parts including Agricultural Machinery need high-precision CNC machining technology, Sheng Wei fully utilize it′s capabilities and state - of - the - art CNC machining, milling & turning equipment to create a high precision products, like CNC parts, turned parts, turning parts, machine parts, machine shaft & metal parts etc. The Agricultural Machiner shown on the illustration has been received a great satisfaction from our customer and the relationship between us has been good and long since then. Sheng Wei is capable of serving your esteemed company′s requirement on either OEM or ODM. Your inquiry is always highly appreciated and welcome.(2013/Mar/5 12:20:14)]]>
    Tue, 5 Mar 2013 12:20:14 +0800
    <![CDATA[CNC milling machine Machine parts (CNC milling machine)(2015/Apr/20 21:28:01)]]> http://www.shengwei.com.tw/E6-CNC-milling-machine.html
  • This work piece completes with the CNC milling machine processing.
  • Because this work piece uses in the machine the components, needs the intensity the request, therefore chooses SKD11 for the material.
  • This work piece flatness requests in 0.005, the verticality in 0.01, the aperture in 0.008.
  • (2015/Apr/20 21:28:01)]]>
    Mon, 20 Apr 2015 21:28:01 +0800
    <![CDATA[CNC milling machine Fixture‏ (CNC milling machine)(2015/Apr/20 21:23:27)]]> http://www.shengwei.com.tw/E5-CNC-milling-machine.html
  • This parts use the A6061 plate, processes two projects by the CNC milling machine to complete.
  • Big hole and another work piece, because has the function coordination, therefore requests the real roundness in 0.005, aperture common difference below 0.008, Therefore uses bore lathe tool to complete . Processing round hole may obtain the high real roundness with bore lathe the tool.
  • When carries on the second project processing, the fixture clamp way must pay attention, because has the relative relations with the first project hole.(Spread of axies in 0.03)
  • After the processing completes carries on the anodic treatment, avoids oxidizing.
  • (2015/Apr/20 21:23:27)]]>
    Mon, 20 Apr 2015 21:23:27 +0800
    <![CDATA[CNC milling machine Automation Equipment Parts (CNC milling machine)(2015/Apr/19 13:41:14)]]> http://www.shengwei.com.tw/E2-CNC-milling-machine.html This part of the automation equipment for precision parts, the use transports other work pieces for the absorption under, carries on processes together. Because in combination with other components, therefore in the verticality and flatness, has the extremely strict request.

    (2015/Apr/19 13:41:14)]]>
    Sun, 19 Apr 2015 13:41:14 +0800
    <![CDATA[CNC milling machine Packaging Equipment Parts (CNC milling machine)(2015/Apr/19 13:43:49)]]> http://www.shengwei.com.tw/E3-CNC-milling-machine.html This part is used in semiconductor packaging equipment therefore has the following request in the manufacture:

    1. As the left, there were third-order hole, so concentricity requirements to be within 0.01mm.
    2. Two-stage press-fit bearings require large hole, so the accuracy of the hole should be controlled within 0.005mm.

    After the processing completes, carries on the anodic treatment to prevent the oxidation.

    (2015/Apr/19 13:43:49)]]>
    Sun, 19 Apr 2015 13:43:49 +0800
    <![CDATA[CNC milling machine Fastener (CNC milling machine)(2015/Apr/19 13:38:08)]]> http://www.shengwei.com.tw/E1-CNC-milling-machine.html
  • This work piece is small, needs the small cutting tool processing, this is difficulty.
  • The interface point R angle request cannot be bigger than R 0.5, therefore the processing is not easy.
  • Below trench width precision 0.02mm.
  • (2015/Apr/19 13:38:08)]]>
    Sun, 19 Apr 2015 13:38:08 +0800
    <![CDATA[CNC milling machine Mold Machining (CNC Turning Machining)(2015/Apr/20 21:19:57)]]> http://www.shengwei.com.tw/E4-CNC-Turning-Machining.html
  • This work piece uses the CNC milling machine, selects the suitable face cutter and the ice-skate blade, completes using the 3D grave law processing.
  • The machine main axle rotational speed, the XYZ each axial repetition precision and the radio station rigidity all can affect the mold to complete.
  • Manufactures this work piece, besides the machine choice, the processing experience very is also important, because the cutting tool choice and the formula labor law can affect the mold directly the roughness of surface and the precision.
  • (2015/Apr/20 21:19:57)]]>
    Mon, 20 Apr 2015 21:19:57 +0800
    <![CDATA[CNC milling machine cnc milling Taiwan ()(2015/Apr/28 16:52:10)]]> http://www.shengwei.com.tw/cnc-milling-Taiwan.html Sheng Wei is a leading CNC milling company in Taiwan, offering high precision CNC machining center and milling machine for several applications in the industry. With the state of the art CNC milling equipment and advanced machining technology, we have been manufacturing a wide array of sophisticated machined parts for purchaser of agricultural parts, auto parts, telecommunication parts, etc.

    As a Taiwan based milling machining manufacturer in CNC milling field, we always focus on strict quality control of our CNC milling and CNC turning services for our customers. All of our staffs are well trained and all the products are high quality with precision engineering from every single operation to the final production line. Sheng Wei ensures that our services can speed up your fabrication with both efficient time and effective price manners.

    Established in 1974, Sheng Wei Precision has continued to striving efforts in research and design of CNC milling services and CNC machining centers in order to achieve the better end products to market. If you are interested in our products or services, please contact us for more detailed information right away. We can’t wait to hear from you.

    (2015/Apr/28 16:52:10)]]>
    Tue, 28 Apr 2015 16:52:10 +0800
    <![CDATA[CNC milling machine Hydraulic Presses Machinery (17)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/17-hydraulic_presses.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC milling machine Construction Machinery and Equipment (13)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/13-contruetion.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[CNC milling machine Peculiar part processing (CNC milling machine)(2015/Jul/10 14:30:29)]]> http://www.shengwei.com.tw/E7-CNC-milling-machine.html
  • This work piece completes by the CNC milling machine processing.
  • Because this components shape is complex, therefore needs the cutting tool number quite are many, moreover uses the cutting tool outer diameter is small, breaks easily in the production process, the management key point is a cutting tool, so long as because the cutting tool is cut off, before spends time on waste.
  • The technical key point lies in, because the material quality is the precious metal, must make the effective control in the production to reduce the fraction defective.
  • (2015/Jul/10 14:30:29)]]>
    Fri, 10 Jul 2015 14:30:29 +0800
    <![CDATA[CNC milling machine Semiconductor equipment components (CNC milling machine)(2015/Jul/18 10:31:30)]]> http://www.shengwei.com.tw/E8-CNC-milling-machine.html
  • This components process with the CNC milling machine。
  • This components are in semiconductor equipment components, because has the functionality, therefore the aperture common difference request below 0.01, each hole relative spread of axis, simultaneously also requests in 0.02.
  • Although this is only a small part, but it must be done precise and accurate, to the smooth functioning of the machine.
  • (2015/Jul/18 10:31:30)]]>
    Sat, 18 Jul 2015 10:31:30 +0800
    <![CDATA[Electrical Discharge Machining Presentation for equipment (Electrical Discharge Machining)(2015/Jul/18 14:45:26)]]> http://www.shengwei.com.tw/E10-Electrical-Discharge-Machining.html
  • The left chart for the line cutting factory environment, establishes a branch three factory districts.
  • Because sufficient number of machines, plus complete process production management, so the price is very competitive, we can offer customers the lowest cost.
  • The general line Electrical Discharge Machining  factory has not had the precise metering equipment, ShengWei enterprise the precision measuring equipment, the matching integrity the tube system, can guarantee the work piece precision to be possible to achieve the customer demand.
  • (2015/Jul/18 14:45:26)]]>
    Sat, 18 Jul 2015 14:45:26 +0800
    <![CDATA[Electrical Discharge Machining Special tooth profile processing ‏ (Electrical Discharge Machining)(2015/Apr/28 00:08:35)]]> http://www.shengwei.com.tw/E6-Electrical-Discharge-Machining.html
  • This parts complete completely by the CNC Electrical Discharge Machining processing.
  • The tooth profile has the functionality (shape to have request specially), therefore essential use outline machine survey.
  • Each tooth depth, common difference request in 0.005, therefore the processing has certain difficulty.
  • (2015/Apr/28 00:08:35)]]>
    Tue, 28 Apr 2015 00:08:35 +0800
    <![CDATA[Electrical Discharge Machining Tooth processing case (Electrical Discharge Machining)(2015/Apr/27 21:32:17)]]> http://www.shengwei.com.tw/01-Electrical-Discharge-Machining.html
  • This parts complete completely by electrical discharge machining.
  • This parts use thin steel plate (0.3mm), therefore supports on both sides in the jig choice with the jig the way is important, after above two conditions can affect the processing directly work piece flatness.
  • Because the tooth profile has the functionality, it is important in tooth shape and tooth Pitch.
  • (2015/Apr/27 21:32:17)]]>
    Mon, 27 Apr 2015 21:32:17 +0800
    <![CDATA[Electrical Discharge Machining Agricultural machinery parts (Electrical Discharge Machining)(2015/Apr/27 21:35:48)]]> http://www.shengwei.com.tw/02-Electrical-Discharge-Machining.html
  • This workpiece uses 0.2 diameter the copper wire processing to complete.
  • This workpiece key point: Inside circle prominent acme, completes after the processing, cannot distort, moreover the verticality requests below 0.01mm.
  • Inside the rounded tip width requests below 0.01mm.
  • (2015/Apr/27 21:35:48)]]>
    Mon, 27 Apr 2015 21:35:48 +0800
    <![CDATA[Electrical Discharge Machining ShengWei Logo (Electrical Discharge Machining)(2015/Apr/28 00:00:51)]]> http://www.shengwei.com.tw/03-Electrical-Discharge-Machining.html
  • This parts complete completely by electrical discharge machining.
  • Uses the different processing technology, company's LOGO also may present by way of the design with electrical discharge machining
  • Electrical discharge machining can support angle or corner can not be CNC milling machine, so the election of the machining, can be obtained at the lowest cost for maximum effect.
  • (2015/Apr/28 00:00:51)]]>
    Tue, 28 Apr 2015 00:00:51 +0800
    <![CDATA[Electrical Discharge Machining Fixture (Electrical Discharge Machining)(2015/Apr/28 00:03:17)]]> http://www.shengwei.com.tw/04-Electrical-Discharge-Machining.html
  • Such as Left: four square hole because both require R angle 0.5mm or less, so I chose to 0.25mm diameter copper processing.
  • Surface roughness requirements Ra0.4 below, the choice of process technology, rough cut processing time, precise cutting process three times.
  • The different shape part must pay attention to the cutting speed, avoids creating the work piece distortion.
  • (2015/Apr/28 00:03:17)]]>
    Tue, 28 Apr 2015 00:03:17 +0800
    <![CDATA[Electrical Discharge Machining Electrode parts (Electrical Discharge Machining)(2015/Apr/28 00:04:41)]]> http://www.shengwei.com.tw/05-Electrical-Discharge-Machining.html
  • This components choice line cutting processing, the main reason is the work piece trench width only then 1.8mm thickness reaches as high as 20mm, moreover the trench base R angle requests to want R0.25, the common milling machine is unable to process. In the copper wire line diameter choice, uses 0.15mm to carry on the processing
  • Because the material is soft, in the entire processing process, needs, the precision work thickly coordinates mutually, can maintain the work piece original condition not to distort.
  • (2015/Apr/28 00:04:41)]]>
    Tue, 28 Apr 2015 00:04:41 +0800
    <![CDATA[Electrical Discharge Machining Gear (Electrical Discharge Machining)(2015/Jul/18 14:48:12)]]> http://www.shengwei.com.tw/E11-Electrical-Discharge-Machining.html
  • This piece complete with Electrical Discharge Machining.
  • This piece is the development of the sample, so use Electrical Discharge Machining.
  • By Electrical Discharge Machining tooth profile, involute also can conform to the plan requirement first, regarding the development sample, the CNC line cutting processing is the very good choice.
  • (2015/Jul/18 14:48:12)]]>
    Sat, 18 Jul 2015 14:48:12 +0800
    <![CDATA[Electrical Discharge Machining Copper Electrical Discharge Machining (Electrical Discharge Machining)(2015/Jul/18 14:51:06)]]> http://www.shengwei.com.tw/E12-Electrical-Discharge-Machining.html
  • This work piece with the Electrical Discharge Machining, divides into two project processings to complete.
  • The work piece vertical place R angle requests below 0.25, therefore the use diameter 0.15 copper wire carry on the processing.
  • Because work piece request verticality below 0.01, after therefore the first project completes, in carries on before the second project processing, must carry on the survey first, the definite verticality conforms to the plan requirement, can carry on the second project processing.
  • Workpiece production process, is added to measure movement have spent a lot of time, but at the insistence of quality first, each step must be completed.
  • (2015/Jul/18 14:51:06)]]>
    Sat, 18 Jul 2015 14:51:06 +0800
    <![CDATA[Electrical Discharge Machining Cutting tool & Tool apron (Electrical Discharge Machining)(2015/Jul/18 14:57:55)]]> http://www.shengwei.com.tw/E13-Electrical-Discharge-Machining.html
  • This work piece has used the compound expression processing, matches the Electrical Discharge Machining and the CNC milling machine processing.
  • Because the cutting tool easy to break in the processing process, therefore cutting tool to central high request. The hole and the plane position must in 0.01.
  • This piece is custom-made knife. Knife holder will also fixed three cutting tools, therefore the steel and degree of hardness are specially important, therefore chooses tool steel SKD11 to do for the material, and carries on the heat treatment, strengthens its steel and degree of hardness.
  • (2015/Jul/18 14:57:55)]]>
    Sat, 18 Jul 2015 14:57:55 +0800
    <![CDATA[Electrical Discharge Machining Semiconductor Equipment Parts ‏ (Electrical Discharge Machining)(2015/Jul/10 17:38:53)]]> http://www.shengwei.com.tw/E7-Electrical-Discharge-Machining.html
  • This work piece with Electrical Discharge Machining, divides into two projects only then to process completes.
  • Hole 0.005mm wheelbase requires less aperture 0.003 or less, there is a very high demand for precision.
  • The surface roughness of the following requirements Ra0.4, Need a rough cut, fine cut three times to complete.
  • (2015/Jul/10 17:38:53)]]>
    Fri, 10 Jul 2015 17:38:53 +0800
    <![CDATA[Electrical Discharge Machining EDM Machining ()(2015/Mar/8 22:31:01)]]> http://www.shengwei.com.tw/edm-machining.html Sheng Wei is one of the leading China based EDM Machining supplier in the Tool and Die industry, offering best qualified equipment for making molds. The technique is often taken as spark eroding, die sinking, or burning; by using electrical discharge machining procedure, it completes a manufacturing process to make a desired shape. And the roughness of the EDM machining parts can also be as smooth as mirror-like surface. In most of the cases, this specific method is used to hard metals, and it is only work with electrically conductive materials.  Normally, the EDM machine functions as a tool to remove the material from the workpiece by using two electrodes which discharge the recure current rapidly.  


    Established in 1974, we have the experienced and techniques to make our products more perfect.  Nowadays, as we've been devoted ourselves in this field for so many years, we're confident to say that we can provide you the best. These electrical discharge machining items like EDM machining are regarded as a practical solution and an integral part for making prototype and production parts. And Sheng Wei can be your best supplier if you need the parts. For more information in details about the , please feel free to send your inquiry to us.  




    (2015/Mar/8 22:31:01)]]>
    Sun, 8 Mar 2015 22:31:01 +0800
    <![CDATA[Electrical Discharge Machining IC & Components (04)(2010/Feb/5 10:27:17)]]> http://www.shengwei.com.tw/04-ic_components.html Fri, 5 Feb 2010 10:27:17 +0800 <![CDATA[Electrical Discharge Machining High-precision fitting (Electrical Discharge Machining)(2015/Jul/10 17:24:18)]]> http://www.shengwei.com.tw/E8-Electrical-Discharge-Machining.html
  • These two work pieces use the CNC line cutting machining to complete.
  • This work piece needs to use the high accuracy the line cutter to be able to complete, Precision request: The outline precision wants below 0.01mm, the parallelism below 0.0025, really straight below 0.003.
  • The surface roughness of the work piece in the following Ra 0.3.
  • Must let two work pieces the gap controls below 0.004, can coordinate closely. Must use the accuracy high radio station to carry on the processing.
  • (2015/Jul/10 17:24:18)]]>
    Fri, 10 Jul 2015 17:24:18 +0800
    <![CDATA[Electrical Discharge Machining Show Technology (Electrical Discharge Machining)(2015/Jun/29 22:20:20)]]> http://www.shengwei.com.tw/E9-Electrical-Discharge-Machining.html
  • This piece complete with Electrical Discharge Machining.
  • First conceived body to CAD established, then use Electrical Discharge Machining, to the processing technology, from the imagination into real cutting.
  • Because tuck with the general working method, some areas will not be processed (interfere), and  Electrical Discharge Machining because of the copper wire with a diameter of 0.1, it is possible to form a smooth cut, therefore reach the requirements of the drawings.
  • (2015/Jun/29 22:20:20)]]>
    Mon, 29 Jun 2015 22:20:20 +0800
    <![CDATA[Five-axis machining Blade (Five-axis machining)(2015/Apr/11 14:02:21)]]> http://www.shengwei.com.tw/E1-Five-axis-machining.html
  • Using five-Axis machining with dynamic engineering methods.
  • This type of parts used for the relevant parts of the development of special aerospace, optoelectronics, semiconductor system of vacuum equipment, air compressors, turbines.
  • (2015/Apr/11 14:02:21)]]>
    Sat, 11 Apr 2015 14:02:21 +0800
    <![CDATA[Five-axis machining Paradigm for Five-axis machining (Five-axis machining)(2015/Apr/11 14:03:31)]]> http://www.shengwei.com.tw/E2-Five-axis-machining.html
  • This part is the use of five-axis milling machine processing. In the process, to avoid a collision between the tool and the workpiece with the clamp, this is the key technology.
  • One of five axis processing characteristics may rotate nimbly for the work piece, therefore the cutting tool stretches out the long hypothesis to be possible to be short, because the cutting tool length is short, therefore cutting tool beating is low, may obtain the better surface roughness and the processing precision.
  • (2015/Apr/11 14:03:31)]]>
    Sat, 11 Apr 2015 14:03:31 +0800
    <![CDATA[Five-axis machining Cutting Tools & Boring Bars (Five-axis machining)(2015/Apr/11 13:54:51)]]> http://www.shengwei.com.tw/E3-Five-axis-machining.html
  • In this part reason angle request, therefore must use five axis manufacturing machine direction detection processing to become.
  • Because this knife handle must coordinate another hilt size, therefore the outer diameter common difference must control in 0.01mm.
  • The state-of-art triangle place uses to design the fixed rejection type bit, therefore has the strict size request. Also the state-of-art triangle place has the multiple angles, processes not easily.
  • This part manufacture material quality is SKD11, is difficultly to cut the material, therefore selects in the cutting tool on, must request the intensity specially.
  • (2015/Apr/11 13:54:51)]]>
    Sat, 11 Apr 2015 13:54:51 +0800
    <![CDATA[Five-axis machining Small blade (Five-axis machining)(2015/Apr/11 13:59:51)]]> http://www.shengwei.com.tw/E4-Five-axis-machining.html
  • This work piece uses five axis manufacturing machines, and with moves the refining methods using five axes to carry on the manufacture.
  • Because of the radio station and the refining methods limit, the general factory leaf blade only can manufacture the great size, in accordance to the end product small tendency, this work piece has been possible to achieve below diameter 30mm the small leaf blade.
  • (2015/Apr/11 13:59:51)]]>
    Sat, 11 Apr 2015 13:59:51 +0800
    <![CDATA[The others Special tools (The others)(2015/Apr/19 12:58:41)]]> http://www.shengwei.com.tw/E3-The-others.html
  • This part processing method is: Universal grinder attrition processing.
  • This part needs a certain intensity, so use HESS material, but the material properties ,therefore must choose the CBN sand blast to carry on the manufacture specially.
  • Head shape according to guests' requests, usage and other related focus, especially for customer design manufacture.
  • (2015/Apr/19 12:58:41)]]>
    Sun, 19 Apr 2015 12:58:41 +0800
    <![CDATA[The others ShengWei processing Technology Introduction (The others)(2015/Jul/18 11:01:15)]]> http://www.shengwei.com.tw/E2-The-others.html
  • Deep processing:Galvanized iron 10 time of deep hole processings, drill bit diameter 10 time of deep hole processing.
  • Small drilling:Micro drill 0.5mm following processing, can be processed to 0.1 drill holes.
  • Outside diameter threading:M1.0 precision machining teeth M1 * 0.2.
  • Inner diameter threading: M0.6*0.15 TAP processing。
  • Surface roughness:May process to Ra 0.2a Rmax 0.8s Rz 0.8z.
  • Precision:Outer diameter 0.003mm, length 0.005mm, in hole 0.005mm 1 level of teeth (3A) .
  •  

    Such as left, center shaft parts are used in air hydraulic motor spindle bore to customer requirements to be met 0.005mm, a tooth (3A).

    (2015/Jul/18 11:01:15)]]>
    Sat, 18 Jul 2015 11:01:15 +0800
    <![CDATA[The others SUS630(17-4PH) difficult to cut the material heat treatment (H900) processing case (The others)(2015/Apr/19 12:49:56)]]> http://www.shengwei.com.tw/E1-The-others.html Sheng Wei aim for SUS630(17-4PH) material quality to carry on the processing, also may help the customer to carry on the heat treatment step (H900), and after heat treatment, and can do electrolytic polishing and passivation cleaning and other follow-up services.and after heat treatment, and can do electrolytic polishing  and passivation cleaning and other follow-up services.

    (2015/Apr/19 12:49:56)]]>
    Sun, 19 Apr 2015 12:49:56 +0800
    <![CDATA[The others Special probe (Order products) (The others)(2015/Jul/16 09:24:01)]]> http://www.shengwei.com.tw/E4-Technology.html
  • This part first to CNC Turning Machining, and then to complete fixture with the grinder grind.
  • This part is a highly regulated probe, so that the vertical axis of the head and the heart need to 0.005, while the flatness of the head to be 0.003 or less, attention to management and maintain the accuracy of processing is an important technology.
  • Because the customer requirements of the parts aperture is relatively small, it is required to modify the shape of the head again, and the smaller-diameter middle engineering methods, care must be taken when grinding fixture holder, will not deform and crush, it is the focus of processing capacity.
  • (2015/Jul/16 09:24:01)]]>
    Thu, 16 Jul 2015 09:24:01 +0800
    <![CDATA[Small parts machining probe (Small parts machining)(2015/Apr/19 12:45:42)]]> http://www.shengwei.com.tw/E1-Small-parts-machining.html
  • Because the workpiece diameter is small, when processing easy to distort.
  • The first tip outer diameter ∮0.1 * 0.15L.
  • The second tip outer diameter ∮0.16 * 1.05L.
  • (2015/Apr/19 12:45:42)]]>
    Sun, 19 Apr 2015 12:45:42 +0800
    <![CDATA[Technology Reveal Kenzan (Technology Reveal)(2015/Apr/11 14:07:31)]]> http://www.shengwei.com.tw/E1-Technology-Reveal.html When this part carries on the manufacture using the milling machine processing, the processing difficulty lies in works as milling each pintle, easy to have the processing to distort causes curving, has enormously possibly can cause the cutting tool break. If simultaneously machine steel not  good enought, machine rotational speed not  quick enought, this part is also unable to complete.(2015/Apr/11 14:07:31)]]> Sat, 11 Apr 2015 14:07:31 +0800 <![CDATA[Technology Reveal Micro eyelet (Aperture ∮0.1) (Technology Reveal)(2015/Jul/18 11:38:47)]]> http://www.shengwei.com.tw/E2-Technology-Reveal.html
  • This components first take the lathe processing as the first project, then carry on the second project milling machine processing, finally completes the micro eyelet processing.
  • Because the aperture only then ∮0.1mm, deep 0.5mm, is very important except the machine main axle rotational speed and the stability, simultaneously supports on both sides the drill bit jig also is the success or failure key, also the processing material is SUS316 (difficult to cut material), increases the processing difficulty.Any step mistake, will be unable to complete this work piece.
  • Need to pay attention to project of the control after the drill hole, including aperture roundness、any burr round aperture.
  • (2015/Jul/18 11:38:47)]]>
    Sat, 18 Jul 2015 11:38:47 +0800
    <![CDATA[Technology Reveal Micro eyelet (Aperture ∮0.09mm) (Technology Reveal)(2015/Jul/18 11:53:29)]]> http://www.shengwei.com.tw/E3-Technology-Reveal.html This first part of the first project in CNC Turning Machining, CNC milling machine and then a second project, the last tiny hole processing is completed.

    2.     Because the aperture only ∮0.1mm, speed and stability of deep 0.5mm. Machine spindle is very important, and the other focused on holding the drill jig, and processing materials SUS316 (difficult to cut materials), increased the difficulty of processing. Negligence any one step will not be completed this piece.

    3.     Roundness and aperture edges around the apertures after drilling, projects need attention.

    (2015/Jul/18 11:53:29)]]>
    Sat, 18 Jul 2015 11:53:29 +0800
    <![CDATA[Management OEM ability (Management)(2015/Jul/18 11:17:59)]]> http://www.shengwei.com.tw/E1-Management.html ShengWei sophisticated use of advanced CNC lathe equipment, the introduction of high-tech manufacturing process technology, combined with highly trained and skilled technicians and staff, and strictly enforce quality control system to QS / ISO standards, the raw Wei innovation capability and high-efficiency technology service standards, industry-leading, so that our customers achieve greater overall satisfaction.

    (2015/Jul/18 11:17:59)]]>
    Sat, 18 Jul 2015 11:17:59 +0800
    <![CDATA[Management Production flow chart (Management)(2015/Aug/24 11:47:04)]]> http://www.shengwei.com.tw/E2-Management.html Sheng Wei from 1974 the commencement of business until now, Already accumulated surpassed 40 year metal working experience, In the quality control, starts from feeding to inspect strictly, We know much about the details of each processing, They are related to the accuracy and quality of the overall customer products, Therefore, from the feed testing, proofing, trial production, small batch production to mass production, each step are based on the most stringent standards to check, So that each processed products are able to produce accurate. To achieve such results, Sheng Wei processing machinery and testing equipment, have adopted the world class machine equipment. For customer's needs, we are proud, not just production to meet customer demand for high quality products, but also to get the trust of our customers. To provide such a good service, it is because we have:

     

    • Accumulated more than 40 years of experience in processing
    • Excellent engineers
    • strict supervision of production and inspection process
    • World-class production and processing equipment
    • The best and complete testing equipment
    • Enterprise core values: insist on technical quality

     

     

    Sheng Wei - Worthy of your trust

    (2015/Aug/24 11:47:04)]]>
    Mon, 24 Aug 2015 11:47:04 +0800